我公司主要生产无机保温砂浆、玻化微珠保温砂浆、珍珠岩保温砂浆、聚苯颗粒保温砂浆、硅酸盐保温砂浆、硅酸镁保温砂浆,欢迎前来选购

廊坊市华东保温材料有限公司详细内容

复合硅酸镁保温砂浆

时间:2016-07-22     作者:www。hdbwsj。com【转载】   阅读

硅酸镁保温砂浆介绍


复合硅酸镁保温砂浆(干粉)是以特种无机胶凝材料为在基料,以优质无机轻体材料为填料,掺入多种有机、无机改性外加剂,采用预混合干拌技术加工而成的一种干粉状保温材料。该材料在施工现场经加水搅拌后成为施工性良好的均匀粘稠浆体,其主要性能是:防水抗渗、导热系数低、结构稳定、质轻、吸音好、粘结力强,能有效地克服墙体裂缝,同时还有无毒、无味、不燃等特点,施工简便。
Composite magnesium silicate thermal insulation mortar (dry powder) is a kind of dry powder heat preservation material, which is based on special inorganic cementitious materials, with a variety of organic and inorganic modified additives, with the addition of a variety of organic and inorganic additives. The material in the construction site by mixing water into uniform viscous slurry construction is good, its main performance is: waterproof, low thermal conductivity, stable structure, light weight, good sound absorption, strong adhesion, can effectively overcome the cracks in the wall, as well as non-toxic, tasteless, non flammable and other characteristics, construction simple.


硅酸镁保温砂浆特点


以多种优质轻体无机矿物质为填料,渗配适量化学添加剂和复合高温粘合剂,经特殊工艺复合精制而成。具有防水抗渗、质轻、阻燃、美观、导热系数小、隔热性能好、粘接强度大、干燥时 间短、便于运输等特点。使用寿命是传统保温材料的3-4倍,保温层厚度是传统保温材料的1/3-1/5。
With a variety of high quality light body mineral as filler, infiltration with appropriate chemical additives and composite high temperature adhesive, the special process of composite refining. It has the characteristics of water resistance, light resistance, light resistance, flame retardant, beautiful, small thermal conductivity, good thermal insulation properties, high bonding strength, short drying time, convenient transportation and so on. Service life is 3-4 times of the traditional insulation material, insulation layer thickness is the traditional insulation material 1/3-1/5.


硅酸镁保温砂浆使用方法


首先将被保温物表面重垢除去,直接加水浸泡涂料1-2小时,并不断翻和成膏状物。施工时采用直涂法,将该品经纬交叉轻涂轻抹。首次涂层厚度不宜超过5mm,干后再涂第二层 涂层厚度10-15mm,直至达到保温层厚度,待表面稍凝后压光,养护处理即可
First of all, the surface of the heat preservation material is removed, the direct water immersion coating 1-2 hours, and continue to turn into paste. When using the direct coating method, the article will be the product of light and cross light. The thickness of the first coating is not more than 5mm, and then coated with second coating thickness 10-15mm, until the insulation layer thickness, the surface slightly after the pressure light, curing can be

以下产品    详细咨询18832673888   进入网站查看详细情况

 

保温砂浆 www。hdbwsj。com

硅酸盐板

阿里巴巴华东官网

阿里巴巴华东分店 huadong.1688.com


最新评论
请先登录才能进行回复登录
  • 电话直呼

    • 18831662333
    • 销售经理 :
    • 售前咨询 :
    • 售前咨询 :
    • 售后服务 :
    • 售后服务 :
    • 合同签订/施工方案 :
    • 合同签订/施工方案 :
  • 扫一扫,关注旺铺

河南庆光机械设备有限公司 北大青鸟通州校区 郑州市豫民机械制造厂 廊坊市华东保温材料有限公司成都麦德生科技有限公司 北京稳固得电子有限公司 成都市活达化工有限责任公司 十大棋牌游戏排行榜 惠州市四顺洋伞有限公司 济宁福康机械加工有限公司 国家授权正规彩票平台